High precisionChristmas Light Hanger for 15 mm Glass Railings
This hanger provides a simple way to install Christmas lights on a glass fence, railing or windbreak made from 15 mm thick glass. The U-shaped section slides carefully over the top edge of the glass, while the Christmas light cable is inserted into the open hook. No drilling or permanent attachment to the glass is required. The stated 15 mm refers to the thickness of the glass itself. Measure the panel before ordering and select the matching model. Clean both the glass edge and the hanger before installation to prevent dirt or grit from becoming trapped. Never force the hanger onto the glass.
€9.00
In stock (ships in 24h)
Material & ColorPETG Basic (Sort)
Pack size
Quantity
1
€9.00
Fast delivery
1-3 days in Denmark
Quality assured
Inspected prior to dispatch
Technical Overview
Material: PETGSize: 25x3x30Weight: 7 gPack of 20
Care & safety
- Avoid prolonged exposure to direct sunlight (UV) if using PLA.
- Keep away from heat sources exceeding 60 degrees C.
- Periodically check joint tension and re-tighten M3 bolts as needed.
- Not suitable for children under 14 due to pinch points.